Global Automotive Thermoplastic Polymer Composite Market Size study, by Production Type (Hand Layup, Resin Transfer Molding, Vacuum Infusion Processing, Injection Molding, Compression Molding), by Application (Structural Assembly, Power Train Components, Interior, Exterior, Others) and Regional Forecasts 2020-2027
- Report Code : BIZ2300840
- Published On: Feb, 2021
- Category : Automotive systems and accessories
- Pages : 200
-
Global Automotive Thermoplastic Polymer Composite Market is valued at approximately USD XXX billion in 2019 and is anticipated to grow with a healthy growth rate of more than 7% over the forecast period 2020-2027. The current technological developments in the automotive composite industry have enabled the automotive manufacturers to use efficient materials or technologies, which helps reduce the carbon emission level and improve the overall vehicle efficiency. For this reason, thermoplastic polymer composite has gained considerable popularity in automotive manufacturing. Also, the recent environmental and economic concerns raise awareness among automobile manufacturing companies for this composite material. As the use of thermoplastic polymer composite helps increased impact resistance of vehicles and reduce fuel consumption, owing to its low weight properties. Thus, this factor may strengthen market growth throughout the world. Moreover, rising sales and production of commercial vehicles and passenger cars, increasing awareness among automobile manufacturers concerning vehicle efficiency and fuel consumption, and strict government norms and regulation concerning environment safety are the few factors responsible for the CAGR of the market during the forecast period. As per the analysis of European Commission, it is projected that emission regulations require a mere 95Kg/Km by 2021 with a further 15% decline by 2025 and is likely to observe a 30% reduction in 2030 from 2021. Likewise, according to the Carbon Brief Organization, the Indian Government planning to reduce the intensity of its carbon emission by 33-35% till 2030. This, in turn, is likely to strengthen the demand for automotive thermoplastic polymer composite, thereby contributing to the market growth around the world. However, the high cost of reinforcing materials and processing, coupled with the absence of a mass production method are the few factors restraining the market growth over the forecast period of 2020-2027.
The regional analysis of the global automotive thermoplastic polymer composite market is considered for the key regions such as Asia Pacific, North America, Europe, Latin America, and Rest of the World. Europe is the leading/significant region across the world in terms of market share owing to the rising focus to implement automotive thermoplastic polymer composite among manufacturers, along with the significant presence of market vendors in the region. Whereas Asia-Pacific is also anticipated to exhibit the highest growth rate / CAGR over the forecast period 2020-2027. Factors such as the rise in production of passenger vehicles and luxury cars coupled with stringent government norms concerning environment safety and emission in the developing nations, such as China and India, are the few factors creating a lucrative opportunity for the growth of the Automotive Thermoplastic Polymer Composite market in the Asia-Pacific region.
Major market player included in this report are:
3B-Fibreglass sprl
Cytec Industries Inc.
Arkema Group
Celanese Corp.
Daicel Polymer Ltd.
DuPont de Nemours, Inc.
Hexcel Corp.
TechnoCompound GmbH
PolyOne Corporation
Toray Industries
The objective of the study is to define market sizes of different segments & countries in recent years and to forecast the values to the coming eight years. The report is designed to incorporate both qualitative and quantitative aspects of the industry within each of the regions and countries involved in the study. Furthermore, the report also caters the detailed information about the crucial aspects such as driving factors & challenges which will define the future growth of the market. Additionally, the report shall also incorporate available opportunities in micro markets for stakeholders to invest along with the detailed analysis of competitive landscape and product offerings of key players. The detailed segments and sub-segment of the market are explained below:
By Production Type:
Hand Layup
Resin Transfer Molding
Vacuum Infusion Processing
Injection Molding
Compression Molding
By Application:
Structural Assembly
Power Train Components
Interior
Exterior
Others
By Region:
North America
U.S.
Canada
Europe
UK
Germany
France
Spain
Italy
ROE
Asia Pacific
China
India
Japan
Australia
South Korea
RoAPAC
Latin America
Brazil
Mexico
Rest of the World
Furthermore, years considered for the study are as follows:
Historical year – 2017, 2018
Base year – 2019
Forecast period – 2020 to 2027
Target Audience of the Global Automotive Thermoplastic Polymer Composite Market in Market Study:
Key Consulting Companies & Advisors
Large, medium-sized, and small enterprises
Venture capitalists
Value-Added Resellers (VARs)
Third-party knowledge providers
Investment bankers
Investors
-
With tables and figures helping analyze worldwide Global Automotive Thermoplastic Polymer Composite market, this research provides key statistics on the state of the industry and is a valuable source of guidance and direction for companies and individuals interested in the market.
Chapter 1. Executive Summary
1.1. Market Snapshot
1.2. Global & Segmental Market Estimates & Forecasts, 2018-2027 (USD Billion)
1.2.1. Automotive Thermoplastic Polymer Composite Market, by Region, 2018-2027 (USD Billion)
1.2.2. Automotive Thermoplastic Polymer Composite Market, by Production Type, 2018-2027 (USD Billion)
1.2.3. Automotive Thermoplastic Polymer Composite Market, by Application, 2018-2027 (USD Billion)
1.3. Key Trends
1.4. Estimation Methodology
1.5. Research Assumption
Chapter 2. Global Automotive Thermoplastic Polymer Composite Market Definition and Scope
2.1. Objective of the Study
2.2. Market Definition & Scope
2.2.1. Scope of the Study
2.2.2. Industry Evolution
2.3. Years Considered for the Study
2.4. Currency Conversion Rates
Chapter 3. Global Automotive Thermoplastic Polymer Composite Market Dynamic
3.1. Automotive Thermoplastic Polymer Composite Market Impact Analysis (2018-2027)
3.1.1. Market Drivers
3.1.2. Market Challenges
3.1.3. Market Opportunities
Chapter 4. Global Automotive Thermoplastic Polymer Composite Market Industry Analysis
4.1. Porter’s 5 Force Model
4.1.1. Bargaining Power of Suppliers
4.1.2. Bargaining Power of Buyers
4.1.3. Threat of New Entrants
4.1.4. Threat of Substitutes
4.1.5. Competitive Rivalry
4.1.6. Futuristic Approach to Porter’s 5 Force Model (2017-2027)
4.2. PEST Analysis
4.2.1. Political
4.2.2. Economical
4.2.3. Social
4.2.4. Technological
4.3. Investment Adoption Model
4.4. Analyst Recommendation & Conclusion
Chapter 5. Global Automotive Thermoplastic Polymer Composite Market, by Production Type
5.1. Market Snapshot
5.2. Global Automotive Thermoplastic Polymer Composite Market by Production Type, Performance - Potential Analysis
5.3. Global Automotive Thermoplastic Polymer Composite Market Estimates & Forecasts by Production Type 2017-2027 (USD Billion)
5.4. Automotive Thermoplastic Polymer Composite Market, Sub Segment Analysis
5.4.1. Hand Layup
5.4.2. Resin Transfer Molding
5.4.3. Vacuum Infusion Processing
5.4.4. Injection Molding
5.4.5. Compression Molding
Chapter 6. Global Automotive Thermoplastic Polymer Composite Market, by Application
6.1. Market Snapshot
6.2. Global Automotive Thermoplastic Polymer Composite Market by Application, Performance - Potential Analysis
6.3. Global Automotive Thermoplastic Polymer Composite Market Estimates & Forecasts by Application 2017-2027 (USD Billion)
6.4. Automotive Thermoplastic Polymer Composite Market, Sub Segment Analysis
6.4.1. Structural Assembly
6.4.2. Power Train Components
6.4.3. Interior
6.4.4. Exterior
6.4.5. Others
Chapter 7. Global Automotive Thermoplastic Polymer Composite Market, Regional Analysis
7.1. Automotive Thermoplastic Polymer Composite Market, Regional Market Snapshot
7.2. North America Automotive Thermoplastic Polymer Composite Market
7.2.1. U.S. Automotive Thermoplastic Polymer Composite Market
7.2.1.1. Production Type breakdown estimates & forecasts, 2017-2027
7.2.1.2. Application breakdown estimates & forecasts, 2017-2027
7.2.2. Canada Automotive Thermoplastic Polymer Composite Market
7.3. Europe Automotive Thermoplastic Polymer Composite Market Snapshot
7.3.1. U.K. Automotive Thermoplastic Polymer Composite Market
7.3.2. Germany Automotive Thermoplastic Polymer Composite Market
7.3.3. France Automotive Thermoplastic Polymer Composite Market
7.3.4. Spain Automotive Thermoplastic Polymer Composite Market
7.3.5. Italy Automotive Thermoplastic Polymer Composite Market
7.3.6. Rest of Europe Automotive Thermoplastic Polymer Composite Market
7.4. Asia-Pacific Automotive Thermoplastic Polymer Composite Market Snapshot
7.4.1. China Automotive Thermoplastic Polymer Composite Market
7.4.2. India Automotive Thermoplastic Polymer Composite Market
7.4.3. Japan Automotive Thermoplastic Polymer Composite Market
7.4.4. Australia Automotive Thermoplastic Polymer Composite Market
7.4.5. South Korea Automotive Thermoplastic Polymer Composite Market
7.4.6. Rest of Asia Pacific Automotive Thermoplastic Polymer Composite Market
7.5. Latin America Automotive Thermoplastic Polymer Composite Market Snapshot
7.5.1. Brazil Automotive Thermoplastic Polymer Composite Market
7.5.2. Mexico Automotive Thermoplastic Polymer Composite Market
7.6. Rest of The World Automotive Thermoplastic Polymer Composite Market
Chapter 8. Competitive Intelligence
8.1. Top Market Strategies
8.2. Company Profiles
8.2.1. 3B-Fibreglass sprl
8.2.1.1. Key Information
8.2.1.2. Overview
8.2.1.3. Financial (Subject to Data Availability)
8.2.1.4. Product Summary
8.2.1.5. Recent Developments
8.2.2. Cytec Industries Inc.
8.2.3. Arkema Group
8.2.4. Celanese Corp.
8.2.5. Daicel Polymer Ltd.
8.2.6. DuPont de Nemours, Inc.
8.2.7. Hexcel Corp.
8.2.8. TechnoCompound GmbH
8.2.9. PolyOne Corporation
8.2.10. Toray Industries
Chapter 9. Research Process
9.1. Research Process
9.1.1. Data Mining
9.1.2. Analysis
9.1.3. Market Estimation
9.1.4. Validation
9.1.5. Publishing
9.2. Research Attributes
9.3. Research Assumption
-
The Global Automotive Thermoplastic Polymer Composite Market has been segregated into various crucial divisions including applications, types, and regions. Each market segment is intensively studied in the report contemplating its market acceptance, worthiness, demand, and growth prospects. The segmentation analysis will help the client to customize their marketing approach to have a better command of each segment and to identify the most prospective customer base.
Report Objectives / Segmentation Covered :
By Companies / players:
By Regions:
By Type:
By Application:
Frequently asked questions(FAQ's):
A large number of Global Global Automotive Thermoplastic Polymer Composite players are focusing on individualized and innovative technologies that will provide the necessary impetus for profit and growth in the coming years.
In 2023, the Global Automotive Thermoplastic Polymer Composite Market share exceeded USD xx million. Between 2024 and 2029, it will grow at a CAGR of yy%.
Consumer behavior changes will reshape the entire decision-making process and companies in the Global Automotive Thermoplastic Polymer Composite Industry will need to adapt quickly.
This latest research publication on the Global Automotive Thermoplastic Polymer Composite Market is an in-depth market tracker that provides a comprehensive assessment of the challenges that manufacturers face in achieving new growth cycles in the current scenario.
